View FAR-F5CP-902M50-D205_356861.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FUJITSU MEDIA DEVICE DATA SHEET
DS04-23122-3E
ASSP Mobile Communication Systems
Piezoelectric SAW BPF
(700 to 1700MHz)
F5CP/F6CP Series (D2 type)
s DESCRIPTION
The F5CP/F6CP series of SAW band pass filters have 2.5 mm x 2.0 mm x 0.9 mm (h) of ultra small package, which are available in the 700 to 2000 MHz frequency range. They exhibit high stability by using single crystal, Lithium Tantalate (LiTaO3) with a large electro-mechanical coefficient. Typical applications for the F5CP/F6CP series include RF interstage filtering in mobile communications systems. Standard devices are available for AMPS, GSM, EGSM, PDC800, PDC1.5G.
s FEATURES
* Ultra compact and light package (2.5 mm x 2.0 mm x 0.9 mm (h) *) *: 1.0 mm height maximum * Excellent stop band attenuation * External matching are not required (50 I/O) * Standard devices are available for mobile communication standards
s PACKAGE
F5CP/F6CP Series
s PIN ASSIGNMENT
(BOTTOM VIEW)
1
2
4
3
s PIN DESCRIPTION
Pin No. 1 2 3 4 Symbol IN GND OUT GND Input pin Ground pin Output pin Ground pin Descriptions
2
F5CP/F6CP Series
s ABSOLUTE MAXIMUM RATINGS
Parameter Ambient operating temperature Storage temperature Input power F5CP Series F6CP Series Symbol Ta Tstg Pin Rating Min. -30 -40 -5 Max. +85 +100 +15 +10 +5 Unit C C dBm dBm V
Input DC voltage
WARNING: Piezoelectric devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
s RECOMMENDED OPERATING CONDITIONS
Parameter Operating temperature Symbol Ta Value Min. -30 Max. +85 Unit C
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the piezoelectric device. All of the device's electrical characteristics are warranted when the device is operated within these ranges. Always use piezoelectric devices within their recommended operating condition ranges. Operation outside these ranges may adversely affect reliability and could result in device failure. No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their FUJITSU representatives beforehand.
s STANDARD DEVICES
System PDC800 AMPS/CDMA/ TDMA GSM EGSM PDC1.5G TX RX TX RX TX RX RX TX RX Center Band width frequency (MHz) (MHz) 950.0 820.0 836.5 881.5 902.5 947.5 942.5 1441.0 1489.0 20 20 25 25 25 25 35 24 24 Part symbol 9 2 3 4 5 6 1 7 8 Part number FAR-F5CP-950M00-D209 FAR-F5CP-820M00-D202 FAR-F5CP-836M50-D203 FAR-F5CP-881M50-D204 FAR-F5CP-902M50-D205 FAR-F5CP-947M50-D206 FAR-F5CP-942M50-D201 FAR-F6CP-1G4410-D207 FAR-F6CP-1G4890-D208 Remarks
3
F5CP/F6CP Series
s ELECTRICAL CHARACTERISTICS AND TYPICAL FREQUENCY RESPONSE
A
1. SYSTEM : PDC800-Tx
PART NUMBER : FAR-F5CP-950M00-D209 Parameter Insertion loss In-band ripple Conditions 940 to 960 MHz 940 to 960 MHz DC to 830 MHz Absolute attenuation 1015 to 1106 MHz 1106 to 1700 MHz 1700 to 2000 MHz In-band VSWR (Return loss) 940 to 960 MHz Value Min. 45 35 45 40 (8.1) Typ. 3.1 0.8 52 42 55 48 2.1 (9.0) Max. 3.5 1.2 2.3 () Unit dB dB dB dB dB dB (dB) Remarks
S21
log MAG
10 dB/ 1
REF 0 dB
1 : -2.8224 dB 940 MHz 2 : -2.672 dB 960 MHz 3 : -55.793 dB 830 MHz 4 : -43.18 dB 1.015 GHz
S11
1U FS
1 : 51.404
-11.736
14.426 pF 940 MHz 2 : 65.227 -15.25 960 MHz 3 : 3.3965 -52.201 830 MHz 4 : 13.656 -85.102 1.015 GHz
2
1 4 3 2
4 CENTER 950 MHz S11 SWR 3 1/ REF 1 4 SPAN 300 MHz 1 : 1.2627 940 MHz 2 : 1.4555 960 MHz 3 : 30.774 830 MHz 4 : 14.488 1.015 GHz 1 2 CENTER 950 MHz 3 SPAN 300 MHz -11.197
S22
1U FS
1 : 48.162
15.121 pF 940 MHz 2 : 62.332 -11.52 960 MHz 3 : 3.3203 -51.557 830 MHz 4 : 14.066 -83.52 1.015 GHz
1 CENTER 950 MHz 2 SPAN 300 MHz CENTER 950 MHz 3
4 SPAN 300 MHz
4
F5CP/F6CP Series
2. PDC800-RX
PART NUMBER : FAR-F5CP-820M00-D202 Parameter Insertion loss In-band ripple Conditions 810 to 830 MHz 810 to 830 MHz DC to 760 MHz 855 to 875 MHz Absolute attenuation 875 to 920 MHz 920 to 1200 MHz 1200 to 2000 MHz In-band VSWR (Return loss) 810 to 830 MHz Value Min. 45 28 35 45 40 (8.5) Typ. 2.6 0.8 52 30 38 55 47 2.0 (9.5) Max. 3.3 1.5 2.2 () Unit dB dB dB dB dB dB dB (dB) Remarks
S21
log MAG
10 dB/ 1
REF 0 dB
1 : -2.4056 dB 810 MHz 2 : -2.5113 dB 830 MHz 3 : -56.9 dB 760 MHz 4 : -31.782 dB 855 MHz
S11
1U FS
1 : 50.861
-8.7852
22.366 pF 810 MHz 2 : 88.93 5.2227 830 MHz 3 : 4.5723 -48.232 760 MHz 4 : 22.301 -121.53 855 MHz
2
4
1 2
3 4 3
CENTER 820 MHz S11 SWR 3 1/ REF 1 4
SPAN 300 MHz 1 : 1.1966 810 MHz 2 : 1.7897 830 MHz 3 : 21.137 760 MHz 4 : 15.897 855 MHz
CENTER 820 MHz
SPAN 300 MHz -8.2246
S22
1U FS
1 : 51.545
23.89 pF 810 MHz 2 : 86.727 6.6094 830 MHz 3 : 4.5059 -47.348 760 MHz
1 2
4 : 22.906 -119.41 855 MHz
4 1 CENTER 820 MHz 2 SPAN 300 MHz CENTER 820 MHz 3 SPAN 300 MHz
5
F5CP/F6CP Series
3. SYSTEM : AMPS-Tx
PART NUMBER : FAR-F5CP-836M50-D203 Parameter Insertion loss In-band ripple Absolute attenuation In-band VSWR (Return loss) Conditions 824 to 849 MHz 824 to 849 MHz DC to 800 MHz 869 to 1049 MHz 1049 to 2000 MHz 824 to 849 MHz Value Min. 45 29 45 (8.5) Typ. 3.0 1.1 50 35 50 1.9 (10.2) Max. 3.5 1.6 2.2 () Unit dB dB dB dB dB (dB) Remarks
S21
log MAG
10 dB/ 1
REF 0 dB
1 : -2.8742 dB 824 MHz 2 : -2.7828 dB 849 MHz 3 : -51.439 dB 800 MHz 4 : -34.045 dB 869 MHz
S11
1U FS
1 : 38.709
0.1641
31.689 pH 824 MHz 2 : 70.559 -11.789 849 MHz 3 : 2.6631 -30.007 800 MHz
2
4
1 2
4 : 13.117 -138.59 869 MHz
3
4 3 CENTER 835 MHz 1 : 38.223
CENTER 835 MHz S11 SWR 1/ 3 REF 1 4
SPAN 300 MHz 1 : 1.2937 824 MHz 2 : 1.4867 849 MHz 3 : 25.566 800 MHz 4 : 33.367 869 MHz
SPAN 300 MHz 1.1992
S22
1U FS
231.63 pH 824 MHz 2 : 70.09 -9.5508 849 MHz 3 : 2.4951 -30.189 800 MHz
1 2
4 : 13.344 -140.89 869 MHz
4 1 CENTER 835 MHz 2 SPAN 300 MHz 3 CENTER 835 MHz SPAN 300 MHz
6
F5CP/F6CP Series
4. SYSTEM : AMPS-Rx
PART NUMBER : FAR-F5CP-881M50-D204 Parameter Insertion loss In-band ripple Conditions 869 to 894 MHz 869 to 894 MHz DC to 779 MHz 779 to 849 MHz Absolute attenuation 914 to 970 MHz 970 to 1049 MHz 1049 to 2000 MHz In-band VSWR (Return loss) 869 to 894 MHz Value Min. 45 40 28 50 40 (8.5) Typ. 2.9 1.0 50 47 33 60 50 1.9 (10.2) Max. 3.5 1.6 2.2 () Unit dB dB dB dB dB dB dB (dB) Remarks
S21
log MAG
10 dB/ 1
REF 0 dB
1 : -2.8617 dB 869 MHz 2 : -3.0293 dB 894 MHz 3 : -56.249 dB 849 MHz 4 : -33.517 dB 914 MHz
S11
1U FS
1 : 52.887
-4.0195
45.564 pF 869 MHz 2 : 80.242 -14.598 894 MHz 3 : 2.4668 -22.392 849 MHz
2
4
1 2
4 : 12.961 -142.84 914 MHz
3 4 3 CENTER 880 MHz S11 SWR 1/ 3 REF 1 4 SPAN 300 MHz 1 : 1.1015 869 MHz 2 : 1.6896 894 MHz 3 : 24.367 849 MHz 4 : 35.586 914 MHz CENTER 880 MHz S22 1U FS 1 : 54.602 SPAN 300 MHz 1.627 297.97 pH 869 MHz 2 : 80.621 -8.7813 894 MHz 3 : 2.5654 -22.138 849 MHz 1 2 4 : 15.594 -156.26 914 MHz
4 3 1 CENTER 880 MHz 2 SPAN 300 MHz CENTER 880 MHz SPAN 300 MHz
7
F5CP/F6CP Series
5. SYSTEM : GSM-Tx
PART NUMBER : FAR-F5CP-902M50-D205 Parameter Insertion loss In-band ripple Conditions 890 to 915 MHz 890 to 915 MHz DC to 845 MHz 845 to 870 MHz Absolute attenuation 925 to 935 MHz 935 to 980 MHz 980 to 1200 MHz 1200 to 3000 MHz In-Band VSWR (Return loss) 890 to 915 MHz Value Min. 45 30 7 28 50 30 (9.0) Typ. 3.0 1.1 50 46 16 33 60 40 1.7 (11.7) Max. 3.5 1.6 2.1 () Unit dB dB dB dB dB dB dB dB (dB) Remarks
S21
log MAG
10 dB/ 1
REF 0 dB
1 : -2.7524 dB 890 MHz 2 : -2.6529 dB 915 MHz 3 : -55.923 dB 870 MHz 4 : -14.643 dB 925 MHz 5 : -32.307 dB 935 MHz
S11
1U FS
1 : 41.604
-1.2832
139.36 pF 890 MHz 2 : 77.059 -9.8828 915 MHz 3 : 2.9404 -26.104 870 MHz
2 4
5
1 2
4
4 : 446.91 298.7 925 MHz 5 : 18.18 -155.7 935 MHz
3 5 3 CENTER 900 MHz S11 SWR 1/ 3 REF 1 45 SPAN 300 MHz 1 : 1.2064 890 MHz 2 : 1.584 915 MHz 3 : 21.644 870 MHz 4 : 13.206 925 MHz 5 : 29.787 935 MHz CENTER 900 MHz 1 : 40.996 SPAN 300 MHz -1.9941
S22
1U FS
89.676 pF 890 MHz 2 : 77.371 -7.6758 915 MHz 3 : 3.0254 -25.578 870 MHz
1 2
4
4 : 502.38 264.7 925 MHz 5 : 17.695 -150.65 935 MHz
5 1 CENTER 900 MHz 2 SPAN 300 MHz 3 CENTER 900 MHz SPAN 300 MHz
8
F5CP/F6CP Series
6. SYSTEM : GSM-Rx
PART NUMBER : FAR-F5CP-947M50-D206 Parameter Insertion loss In-band ripple Conditions 935 to 960 MHz 935 to 960 MHz DC to 871 MHz 890 to 915 MHz Absolute attenuation 980 to 1025 MHz 1025 to 2000 MHz 2000 to 3000 MHz In-band VSWR (Return loss) 935 to 960 MHz Value Min. 45 30 25 45 30 (8.1) Typ. 3.1 1.3 50 45 30 48 33 2.1 (9.0) Max. 3.5 1.5 2.3 () Unit dB dB dB dB dB dB dB (dB) Remarks
S21
log MAG
10 dB/ 1
REF 0 dB
1 : -2.9325 dB 935 MHz 2 : -2.8297 dB 960 MHz 3 : -45.716 dB 915 MHz 4 : -30.562 dB 980 MHz
S11
1U FS
1 : 46.617
-4.2656
39.905 pF 935 MHz 2 : 72.273 -12.234 960 MHz 3 : 3.1875 -19.772 915 MHz
2
4
1 2
4 : 18.07 -157.97 980 MHz
3
4 3
CENTER 950 MHz S11 SWR 1/ 3 REF 1 4
SPAN 300 MHz 1 : 1.1193 935 MHz 2 : 1.5219 960 MHz 3 : 18.194 915 MHz 4 : 30.704 980 MHz
CENTER 950 MHz S22 1U FS 1 : 47.164
SPAN 300 MHz -1.9922
85.443 pF 935 MHz 2 : 72.879 -7.1406 960 MHz 3 : 3.4033 -19.452 915 MHz
1 2
4 : 20.859 -170.99 980 MHz
4 3 1 CENTER 950 MHz 2 SPAN 300 MHz CENTER 950 MHz SPAN 300 MHz
9
F5CP/F6CP Series
7. SYSTEM : EGSM-Rx
PART NUMBER : FAR-F5CP-942M50-D201 Parameter Insertion loss In-band ripple Conditions 925 to 960 MHz 925 to 960 MHz DC to 871 MHz 890 to 915 MHz Absolute attenuation 980 to 1025 MHz 1025 to 2000 MHz 2000 to 3000 MHz In-band VSWR (Return loss) 925 to 960 MHz Value Min. 45 15 25 40 25 (6.0) Typ. 3.9 2.0 53 20 29 50 36 2.4 (7.7) Max. 4.8 2.9 3.0 () Unit dB dB dB dB dB dB dB (dB) Remarks
S21
log MAG
10 dB/ 1
REF 0 dB
1 : -3.8751 dB 925 MHz 2 : -2.9443 dB 960 MHz 3 : -33.524 dB 915 MHz 4 : -32.697 dB 980 MHz
S11
1U FS
1 : 24.956
-11.556
14.89 pF 925 MHz 2 : 59.1 -2.7793 960 MHz 3 : 7.0146 -10.637 915 MHz 4 : 15.141 -142.4 980 MHz
2
3
4 1 3 4 2
CENTER 950 MHz S11 SWR 1/ REF 1 4
SPAN 300 MHz 1 : 2.1506 925 MHz 2 : 1.1932 960 MHz 3 : 7.4697 915 MHz 4 : 30.348 980 MHz
CENTER 950 MHz 1 : 25.901
SPAN 300 MHz -15.088
S22
1U FS
11.404 pF 925 MHz 2 : 56.229 -7.6113 960 MHz 3 : 8.3276 -8.667 915 MHz 4 : 13.266 -131.7 980 MHz
3
1 3 1
2
4
CENTER 950 MHz
2
SPAN 300 MHz
CENTER 950 MHz
SPAN 300 MHz
10
F5CP/F6CP Series
8. SYSTEM : PDC1.5G-Tx
PART NUMBER : FAR-F6CP-1G4410-D207 Parameter Insertion loss In-band ripple Conditions 1429 to 1453 MHz 1429 to 1453 MHz DC to 1380 MHz 1477 to 1501 MHz Absolute attenuation 1501 to 1607 MHz 1607 to 1900 MHz 1900 to 3000 MHz In-band VSWR (Return loss) 1429 to 1453 MHz Value Min. 40 25 28 45 30 (7.0) Typ. 3.5 1.3 45 28 30 55 33 2.4 (7.7) Max. 3.8 1.6 2.6 () Unit dB dB dB dB dB dB dB (dB) Remarks
S21
log MAG
10 dB/ 1
REF 0 dB
1 : -2.6466 dB 1.429 GHz 2 : -2.8931 dB 1.453 GHz 3 : -48.237 dB 1.38 GHz 4 : -30.021 dB 1.477 GHz 5 : -61.614 dB 1.607 GHz
S11
1U FS
1 : 39.924
0.0859
9.5712 pH 1.429 GHz 2 : 66.582 -14.813 1.453 GHz 3 : 3.9805 -24.466 1.38 GHz
2
4
1 2
4 : 15.57 -133.34 1.477 GHz 5 : 7.3418 -55.936 1.607 GHz
3 5
4 3 CENTER 1 450 MHz S11 SWR 3 1/ REF 1 4 5 1 : 1.2523 1.429 GHz 2 : 1.4666 1.453 GHz 3 : 15.581 1.38 GHz 4 : 26.309 1.477 GHz 5 : 15.408 1.607 GHz SPAN 400 MHz CENTER 1 450 MHz 5 SPAN 400 MHz 0.4395
S22
1U FS
1 : 39.836
48.944 pH 1.429 GHz 2 : 67.617 -12.059 1.453 GHz 3 : 4.1484 -25.398 1.38 GHz
1 2
4 : 23.188 -166.48 1.477 GHz 5 : 8.541 -61.674 1.607 GHz
4 1 CENTER 1 450 MHz 2 SPAN 400 MHz 3 5 CENTER 1 450 MHz SPAN 400 MHz
11
F5CP/F6CP Series
9. SYSTEM : PDC1.5G-Rx
PART NUMBER : FAR-F6CP-1G4890-D208 Parameter Insertion loss In-band ripple Conditions 1477 to 1501 MHz 1477 to 1501 MHz DC to 1370 MHz 1370 to 1429 MHz Absolute attenuation 1429 to 1453 MHz 1542 to 1566 MHz 1566 to 1607 MHz 1607 to 1900 MHz 1900 to 3000 MHz In-band VSWR (Return loss) 1477 to 1501 MHz Value Min. 45 40 15 28 28 40 30 (6.8) Typ. 3.6 1.3 50 45 30 30 30 45 35 2.5 (7.4) Max. 4.0 1.7 2.7 () Unit dB dB dB dB dB dB dB dB dB (dB) Remarks
S21
log MAG
10 dB/ 1
REF 0 dB
1 : -3.367 dB 1.477 GHz 2 : -3.1358 dB 1.501 GHz 3 : -44.243 dB 1.453 GHz 4 : -35.072 dB 1.542 GHz 5 : -64.128 dB 1.607 GHz
S11
1U FS
1 : 39.094
-17.623
6.1145 pF 1.477 GHz 2 : 52.408 -29.346 1.501 GHz 3 : 7.6753 -6.7566 1.453 GHz 4 : 10.273 -111.5 1.542 GHz
2
4 3
1 3 5 4 2
5 : 7.4102 -67.687 1.607 GHz
CENTER 1 500 MHz S11 SWR 1/ REF 1 4
SPAN 400 MHz 1 : 1.5913 5 1.477 GHz 2 : 1.7639 1.501 GHz 3 : 6.6353 1.453 GHz 4 : 29.248 1.542 GHz 5 : 19.199 1.607 GHz
5 CENTER 1 500 MHz 1 : 42.766 SPAN 400 MHz -19.346
S22
1U FS
5.57 pF 1.477 GHz 2 : 54.113 -28.582 1.501 GHz 3 : 7.5981 -7.1064 1.453 GHz 4 : 12.152 -125.3 1.542 GHz
3
1 3 2
5 : 8.4102 -73.254 1.607 GHz
1 2 CENTER 1 500 MHz SPAN 400 MHz CENTER 1 500 MHz 5
4 SPAN 400 MHz
12
F5CP/F6CP Series
s MEASUREMENT CIRCUIT
Network Analyzer 1 50 Filter 2, 4 3
Network Analyzer
50
1 to 4 : Pin numbers
s PART NUMBER DESIGNATION
[Designation example] FAR-F5CP(1) (2) (1) Frequency range (2) (3) -D2 (3) (4) (5)
(4) (5)
5 : 700 to 1000 MHz 6 : 1000 to 1700 MHz Package size P : 2.5 mm x 2.0 mm x 0.9 mm Frequency This specifies the nominal center frequency using six alphanumeric. M (for MHz) or G (for GHz) indicates the decimal point. [Example] 836.5 MHz 836M50 1.441 GHz 1G4410 Part symbol Numbers specified by Fujitsu Refer to STANDARD DEVICES Packing (Reeled tape) W : 1000 pcs / reel V : 3000 pcs / reel U : 5000 pcs / reel
s MARKING
Production date (EIAJ) Part symbol Lot Code
INDEX
13
F5CP/F6CP Series
s PACKAGE DIMENSIONS
0.9 0.10 2.5 0.10 3
0.88 0.10
4
2.0 0.10
0.63 0.10 1 0.5 Min.
(C 030) INDEX
2 4 - R0.18 0.5 Min.
Dimensions in mm.
s RECOMMENDED FOOT PATTERN ON PCB
0.88 0.5 0.8 1.2 0.5 1.2 0.88
0.5
Dimensions in mm.
14
F5CP/F6CP Series
s PACKING
(1) Reel dimensions
2.0 0.5 21.0 0.8 13.0 0.2 250.0 80.0 R0.1 12.4 -0.0
+2.0
18.4 Max.
Type W V U
Volume 1000 pcs. 3000 pcs. 5000 pcs. Dimensions in mm.
(2) Packing style
Pulling side
Reel side Pulling side
15
F5CP/F6CP Series
(3) Tape dimensions
1.5 0.1
2.0 0.1
4.0 0.1
1.75 0.1
0.3 0.05
5.5 0.1 2.8 2.3 1.5 0.1 4.0 0.1
1.0 0.1
12.0 0.2
Dimensions in mm.
(4) Peel strength of top cover tape Peel off by the force of 0.1 N to 0.7 N under the condition at the right . (Conforms to JIS C 0806 section 5.2)
165 to 180
Direction of pulling Speed 300 mm/min
Embossment carrier type tape
16
F5CP/F6CP Series
s RECOMMENDED REFLOW PROFILE
240 10 s Heating rate 1 to 4 C/s Temperature (C) 210
Air cooling 60 s Pre-Heating 150 60 90 s
Time (s)
s NOTE
Mass-produced product order is accepted by a unit of 1000.
17
F5CP/F6CP Series
FUJITSU MEDIA DEVICES LIMITED
For further information please contact: Japan FUJITSU MEDIA DEVICE LIMITED International Sales & Marketing DEPT. Shin-Yokohama Square Bldg.,14F, Shin-yokohama 2-3-12, Kohoku-ku, Yokohama, Kanagawa 222-0033, Japan Tel: +81-45-471-0061 Fax: +81-45-471-0076
http://www.fujitsu.co.jp/hypertext/fmd/English/index.html
All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. The information and circuit diagrams in this document are presented as examples of semiconductor device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. The contents of this document may not be reproduced or copied without the permission of FUJITSU LIMITED. FUJITSU semiconductor devices are intended for use in standard applications (computers, office automation and other office equipments, industrial, communications, and measurement equipments, personal or household devices, etc.). CAUTION: Customers considering the use of our products in special applications where failure or abnormal operation may directly affect human lives or cause physical injury or property damage, or where extremely high levels of reliability are demanded (such as aerospace systems, atomic energy controls, sea floor repeaters, vehicle operating controls, medical devices for life support, etc.) are requested to consult with FUJITSU sales representatives before such use. The company will not be responsible for damages arising from such use without prior approval. Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan.
North and South America FUJITSU MICROELECTRONICS, INC. 3545 North First Street, San Jose, CA 95134-1804, U.S.A. Tel: +1-408-922-9000 Fax: +1-408-922-9179 Customer Response Center Mon. - Fri.: 7 am - 5 pm (PST) Tel: +1-800-866-8608 Fax: +1-408-922-9179 http://www.fujitsumicro.com/ Europe FUJITSU MICROELECTRONICS EUROPE GmbH Am Siebenstein 6-10, D-63303 Dreieich-Buchschlag, Germany Tel: +49-6103-690-0 Fax: +49-6103-690-122 http://www.fujitsu-fme.com/ Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE. LTD. #05-08, 151 Lorong Chuan, New Tech Park, Singapore 556741 Tel: +65-281-0770 Fax: +65-281-0220 http://www.fmap.com.sg/
F0012 (c) FUJITSU LIMITED Printed in Japan

▲Up To Search▲

Price & Availability of FAR-F5CP-902M50-D205

	To Download FAR-F5CP-902M50-D205 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .